Rapier Tips

These are slotted tips that are made to work by friction.
The hitting end is 3/4" with the da logo; the large hole width is 3/8" and the small hole width is 1/4".
They do not have metal in the ends. Tips must fit very tightly to function properly. If the slides easily onto the blade end, then put a layer of tape or thin leather on the end of the blade until the tip is difficult to get on. This prevents the blade from piercing the end of the tip. Failure to ensure a tight fit will result in premature failure of the tip.
Mounting suggestion: wedge the tip onto the end of the blade, then turn the tip toward the ground and grasp the blade 2" from the tip. Pushing square against the ground, ease the blade into the tip.  It's a whole lot easier than shoving the tip onto the blade with your hands.

Available in a mixed bag of large and small holes, or in a full bag of 5 large or 5 small.

In colors  Red, Black, Purple, Yellow, Blue and Green. (Sorry, at this time (Mar 2013) we are out of blue but we should be restocked shortly)


If you write it in the Notes section,  we can also mix and match any color combination and any hole-size in a bag. (For example, "I need 2 yellow Large, 2 blue Large, and one black Small, thanks" ).